Selectable trigger system converts from sequential to contact operation

Low nail lockout prevents dry firing

Ultra-quiet rear exhaust with muffler directs air away from the user

Reversible belt hook with integrated pencil sharpener

Dial-A-Depth control for precise countersinking

The NT65M2 16-gauge finish nailer features a non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It is ideal for installing molding, chair rail, cabinetry and other fine finish applications. The NT65M2 accepts 16-gauge finish nails in lengths ranging from 1″ up to 2-1/2″ and is equipped with Hitachi’s signature air duster button to conveniently blow away dust and debris instantly to clear the work surface.

• Integrated air duster button allows air from the compressor to bypass the nailing function and expel air from a hole in the front of the nailer allowing the user to clear away dust and debris from the work surface
• Tool-less, easy-to-clear nose for quick and simple nail extraction should a nail jam during use
• Tool-less depth of drive dial allows the user to easily adjust the drive depth for a professional finish
• 3.7 lbs, lightweight and well-balanced for minimal fatigue and increased maneuverability
• No-mar tip protects the work surface from damage

• Size: 3/8" x 50'
• Rubber
• Universal 2-lug fittings
• High quality 300 PSI EPDM rubber hose, durable, abrasion resistant

By creating negative pressure, air scrubbers capture the contaminated air and produces clean non-contaminated air. A negative pressure environment will help to contain the mold, dust, particles and odors within the workspace containment barrier. Air always flows from areas of higher pressure to areas of lower pressure. Creating and maintaining negative pressure creates inward airflow direction through any leaks or openings in the containment barrier. This prevents airborne contaminants from escaping into and contaminating other parts of the work area.

What if we don’t/can’t exhaust the filtered air to the outside?

Negative pressure will still be maintained if the HEPA filtered air is exhausted into an adjacent area inside the
building. HEPA-AIRE PAS can also be utilized for continuous air cleaning, by recirculating 100% of the filtered
air within the containment area. This will boost the ACH (AIR CHANGES PER HOUR) in the project zone and provide HEPA filtration, but it
will not create negative pressure

How do I create a negative pressure environment using HEPA Filtered Portable Air Scrubbers?

In order to create a negative pressure environment, more air must leave the space than enters it. First of all, the project area must be walled off with permanent or temporary construction barriers. Secondly, the Abatement Portable Air Scrubber(s) must be placed inside the construction area. Ductwork should be run from the system to somewhere outside of the project area, preferably to the outside of the building. Since the air is HEPA filtered, it is not mandatory to exhaust air to the outdoors

• Tool-free adjustable exhaust
• Tool-free adjustable rafter hook for convenience
• Durable, lightweight aluminum housing

• Contact Actuation
• Front Exhaust
• Side Load Nylon Magazine
• Body Protector
• Adjustable Shingle Guide for Accurate & Quick Shingle Spacing
• Carbide Nose Insert to Protect the Nose from Wear
• Tool-Free Depth Adjustment for Precise Control in Flush Nailing Shingles
• Ergonomic Rubber Grip
• Air Fitting Included

• Full Sequential Actuation
• Adjustable Depth Control
• Front Exhaust
• Top Load Aluminum Magazine
• Ergonomic Rubber Grip
• Contact Actuation Trigger Kit Included